User Manual Q&AAnswer
Dec 29, 2024 - 12:06 AM
To change the image and adjust settings on the , follow these steps:
1. Ensure that the projector is powered on and connected to a power source.
2. Point the RF wireless remote control towards the projector.
3. Press the "Mode" button on the remote control to switch between different image patterns. Each press of the button will cycle through the available patterns.
4. Use the "Brightness +" and "Brightness -" buttons to adjust the brightness of the projected image. Pressing the "+" button will increase the brightness, while pressing the "-" button will decrease it.
5. To adjust the speed of the projection, press the "Speed +" and "Speed -" buttons. Pressing the "+" button will increase the speed, while pressing the "-" button will decrease it.
6. If you want to pause the projection, press the "Stop" button on the remote control. Pressing it again will resume the projection.
7. To turn off the projector, press the "Power" button on the remote control.
Note: Make sure that there are no obstructions between the remote control and the projector for optimal functionality.
Add New Comment