User Manual Q&AAnswer
Dec 29, 2024 - 12:05 AM
To change the lighting modes on the Hekation C-3 Outdoor Waterproof Light Projector, follow these steps:
1. Ensure that the projector is powered on and connected to a power source.
2. Use the included remote control to access the different lighting modes.
3. Press the mode button on the remote control to cycle through the available modes.
4. The projector offers three modes: jump, auto, and flash. Each mode provides a different lighting effect.
- Jump mode: This mode displays static colors and color combinations, creating a vibrant and dynamic lighting display.
- Auto mode: In this mode, the projector automatically transitions between different colors and lighting effects, creating a continuously changing display.
- Flash mode: This mode produces a strobe-like effect, with rapid color changes and flashing lights.
5. Keep pressing the mode button on the remote control until you find the desired lighting mode.
6. Once you have selected a mode, the projector will continue to display that mode until you change it again.
Note: The remote control allows you to switch between lighting modes, adjust brightness, and set timers. Refer to the user manual for more details on using the remote control and accessing additional features of the Hekation C-3 Outdoor Waterproof Light Projector.
Add New Comment