User Manual Q&AAnswer
Dec 28, 2024 - 11:59 PM
To change the sensitivity mode on the KAIWEETS HT100s Non-Contact Voltage Tester, follow these steps:
1. Locate the "S" button on the tester. This button is used to switch between the sensitivity modes.
2. Press the "S" button once to toggle between the low and high sensitivity modes. The current sensitivity mode will be indicated on the display.
3. In the low sensitivity mode, the tester can detect AC voltage ranging from 12V to 1000V. In the high sensitivity mode, it can detect AC voltage ranging from 70V to 1000V.
4. Choose the appropriate sensitivity mode based on the voltage range you need to detect.
Note: The sensitivity mode can be changed at any time during use, depending on the specific voltage detection requirements of your electrical work.
For more detailed instructions and information, please refer to the user manual provided with the KAIWEETS HT100s Non-Contact Voltage Tester.
Add New Comment