User Manual Q&AAnswer
Dec 28, 2024 - 11:49 PM
To set up the Crosley C8A-WA turntable, follow these steps:
1. Place the unit on a flat and level surface.
2. Install the turntable lid to the hinges.
3. Remove the tie-wrap that is holding the tonearm.
4. Install the turntable platter and drive belt accordingly.
5. Place the slip mat on top of the turntable platter.
6. Insert the Headshell into the socket at the front of the tonearm, and then turn the Headshell Locking Ring counter-clockwise to secure it.
7. Slide the Tonearm Counterweight onto the tonearm and twist it lightly onto the rear shaft of the tonearm.
8. Adjust the counterweight to set the proper stylus pressure.
9. Connect the AC adapter to the Power Jack of the unit.
10. Set the Phono/Line switch to the desired position based on your audio setup.
11. Connect the RCA Cable to the RCA Jacks of the unit and to the corresponding input on your audio system.
12. Power on the unit and select the desired speed (33 1/3 or 45 RPM) using the Speed Selector.
13. Place a record on the turntable and remove the stylus protector.
14. Use the Tonearm Lift Lever to raise the tonearm and move it over the record where playback is desired to begin.
15. Lower the tonearm onto the record using the Tonearm Lift Lever.
16. Enjoy your music!
For more detailed information and troubleshooting tips, please refer to the user guide provided with the product.
Add New Comment