User Manual Q&AAnswer
Dec 28, 2024 - 11:47 PM
To load staples/nails into the NEU MASTER NTC0040-AU Electric Brad Nailer, please follow these steps:
1. Tilt the tool or lay it flat to prevent the staples or nails from dropping out while loading.
2. Press lever A while pulling slider B backwards.
3. Place the staple or nail strip into magazine C (maximum capacity is 90 nails).
- For staples: Ensure that the staple strip is loaded with the crown aligning with the top line of the magazine C.
- For nails: Ensure that the nail strip is loaded with the tapered end aligning with the bottom line of the magazine C, so the brad nail head rests right into the grooves which correspond with the symbol of nail length on the tacker head D.
4. Push slider B against tacker head D until it snaplocks.
Please refer to the NEU MASTER NTC0040-AU Electric Brad Nailer Instruction Manual for visual references and additional information on loading staples/nails.
Add New Comment