User Manual Q&AAnswer
Dec 28, 2024 - 11:39 PM
To pair the Aluratek Bluetooth Wireless Headphones with your device, please follow these steps:
1. Make sure the headphones are powered off.
2. Press and hold the power button on the headphones for 6 seconds until the red and blue LEDs start flashing rapidly. This puts the headphones in pairing mode.
3. Activate the Bluetooth function on your device and set it to search for Bluetooth devices.
4. When the headphones appear in the list of available devices, select them to initiate the pairing process.
5. If your device prompts you for a PIN, enter "0000" (four zeros).
6. If your device asks for permission to connect, select "Yes" to establish the connection.
7. Once the headphones are successfully paired, the blue LED will flash every 3 seconds.
Please note that the pairing procedure may vary slightly depending on your specific device. For more detailed instructions, you can refer to the user manual provided with the headphones.
If you encounter any issues during the pairing process or need further assistance, you can contact Aluratek's support department for troubleshooting. Their contact information can be found in the user manual or on their website.
You can also refer to the user manual for additional information and troubleshooting tips. You can access the user manual for the Aluratek Bluetooth Wireless Headphones here: [link to the user manual].
Add New Comment