User Manual Q&AAnswer
Dec 28, 2024 - 11:35 PM
To load staples into the NEU MASTER NTC0070-4 Cordless Tacker, follow these steps:
1. Make sure the tool is powered off.
2. The NTC0070-4 has a bottom-load staple magazine. Turn the tool upside down and squeeze the pusher assembly to release it.
3. Pull the pusher assembly out until it stops to reveal the staple magazine.
4. Load staples into the magazine with the points facing up and out of the tool. Make sure the staples are inserted correctly.
5. Close the pusher assembly until it snaps into place.
Note: Do not attempt to completely remove the pusher assembly as this may damage the tool and void the warranty.
Add New Comment