User Manual Q&AAnswer
Dec 28, 2024 - 11:33 PM
To connect the Monoprice 133831 Premium 5.1.2-Ch. Immersive Home Theater System to your receiver, follow these steps:
1. Start by identifying the different components of the system. The package includes two immersive satellite speakers, two satellite speakers, one center channel speaker, and one subwoofer.
2. Connect the immersive satellite speakers to the receiver. These speakers have two inputs - top for the atmos upwards firing speaker and bottom for the left or right channel. Connect the appropriate speaker wires from the receiver to these inputs.
3. Connect the satellite speakers to the receiver. These speakers have four speaker ports - two for atmos and two for the left and right channels. Connect the speaker wires from the receiver to the corresponding ports.
4. Connect the center channel speaker to the receiver. This speaker has a single input for the center channel. Connect the speaker wire from the receiver to this input.
5. Connect the subwoofer to the receiver. The subwoofer has line-level and speaker-level stereo inputs. Connect the appropriate cables from the receiver to these inputs. You can also adjust the phase of the subwoofer using the phase control switch on the rear of the device.
6. Once all the connections are made, power on your receiver and follow the setup instructions to configure the audio settings for the Monoprice 133831 Premium 5.1.2-Ch. Immersive Home Theater System.
For more detailed instructions and troubleshooting tips, please refer to the User's Manual included in the package.
Add New Comment