User Manual Q&AAnswer
Dec 28, 2024 - 10:56 PM
Changing the projection discs on the MINGKIDS 012-1652 2-in-1 Rotating Projector Lamp is a simple process. Here are the steps to follow:
1. Make sure the lamp is turned off and unplugged from the power source for safety.
2. Locate the semi-circle shell on the lamp. This is the part that rotates and holds the projection discs.
3. Hold the lamp with one hand and use your other hand to grip the semi-circle shell.
4. Gently twist the semi-circle shell counterclockwise to unlock it. You may need to apply a bit of pressure, but be careful not to force it.
5. Once the semi-circle shell is unlocked, it should easily lift off the lamp, exposing the projection discs.
6. Take out the current projection disc by sliding it out of the slot. Be careful not to touch the lens or any other sensitive parts.
7. Choose the desired projection disc from the set provided with the lamp or any additional discs you may have purchased separately.
8. Align the new projection disc with the slot in the lamp, making sure it is inserted correctly and securely.
9. Place the semi-circle shell back onto the lamp, aligning the tabs on the shell with the slots on the lamp.
10. Twist the semi-circle shell clockwise to lock it back into place. Again, apply gentle pressure and ensure it is securely fastened.
11. Plug the lamp back into the power source and turn it on to enjoy the new projection theme.
Note: If you encounter any difficulties or the projection discs do not fit properly, refer to the user manual or contact customer support for further assistance.
Remember to always handle the projection discs with care to avoid any damage or scratches that could affect the quality of the projections.
Add New Comment