User Manual Q&AAnswer
Dec 28, 2024 - 10:34 PM
Sure! Here are step-by-step instructions on how to install the SiriusXM SXV300V1 Satellite Radio Vehicle Tuner in your car:
1. Check your head unit for compatibility: Make sure your head unit has the official SiriusXM-Ready logo and a dedicated connector for the SXV300 tuner.
2. Install the Magnetic Mount Antenna: Place the Magnetic Mount Antenna on the outside of your vehicle on a horizontal surface that always faces the sky. Avoid placing it near obstacles that could block the satellite signal.
3. Select the best location for the Magnetic Mount Antenna: For most vehicles, the recommended mounting location is on the roof, centered above the rear window or front windshield. Consult a professional installer if your vehicle roof is made from a non-magnetic material.
4. Route the Antenna Cable: Carefully route the antenna cable into and through the vehicle interior, avoiding sharp objects that can damage the cable. Hide the antenna wire inside the vehicle cabin by routing it under the carpet and behind plastic trim, towards the head unit location.
5. Make the connections: Access the back of your SiriusXM-Ready head unit and locate the SiriusXM connector. Connect the SXV300 Vehicle Tuner to the head unit using the provided interface cable. Secure the tuner behind the head unit location or under the dash using wire ties.
6. Subscribe to the SiriusXM service: Make sure your vehicle head unit is turned on and receiving the SiriusXM signal. Make a note of your Radio ID, which can be found on channel 0, the packaging label, and the label on the bottom of the tuner. Activate your service online at www.siriusxm.com/activate or by phone at 1-866-587-4225.
That's it! You should now have the SiriusXM SXV300V1 Satellite Radio Vehicle Tuner installed and ready to enjoy satellite radio in your car. For more detailed instructions and illustrations, please refer to the complete installation guide provided with the product.
Add New Comment