User Manual Q&AAnswer
Dec 28, 2024 - 10:34 PM
To charge the battery of the Anstoy AKM-47 Electric Gel Ball Blaster, follow these steps:
1. Unpack the blaster and locate the USB cable that came with it.
2. Connect one end of the USB cable to the blaster's charging port, which is usually located on the side or bottom of the blaster.
3. Plug the other end of the USB cable into a USB power source, such as a computer, wall adapter, or power bank.
4. The blaster's battery will start charging. You can usually see a charging indicator light on the blaster that will turn on to indicate that it is charging.
5. Allow the battery to charge fully. The charging time may vary, but it is recommended to charge it for the specified time mentioned in the manual.
6. Once the battery is fully charged, disconnect the USB cable from the blaster.
It is important to note that you should always use the USB cable provided with the blaster or a compatible USB cable to ensure safe and proper charging. Avoid using third-party or incompatible chargers, as they may damage the battery or the blaster.
For more detailed instructions and safety precautions, please refer to the Anstoy AKM-47 Electric Gel Ball Blaster User Manual provided with the product.
Add New Comment