User Manual Q&AAnswer
Dec 28, 2024 - 10:27 PM
To connect the Klipsch Synergy Black Label B-100 Bookshelf Speakers to your amplifier, follow these steps:
1. Ensure that your amplifier is turned off and unplugged from the power source.
2. Using a 16-gauge or larger speaker wire, connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
3. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
4. Repeat the above steps for connecting the remaining speaker to the appropriate amplifier channel.
5. Make sure that no bare wires from any of the connections touch any other terminals, as this could cause a short and damage your equipment.
It's important to note that Klipsch speakers are highly efficient and can be driven by a wide variety of amplifiers. However, it's recommended to exercise caution with the volume control to avoid overdriving your amplifier and potentially damaging your speakers. If you're unsure about the compatibility of your amplifier with the Klipsch B-100 speakers, it's best to consult with your dealer or refer to the amplifier's specifications.
For more detailed instructions and illustrations, please refer to the complete instruction manual provided with the product. You can access the manual [here](https://manuals.plus/wp-content/uploa...).
Add New Comment