User Manual Q&AAnswer
Dec 28, 2024 - 10:23 PM
To load staples into the DeWalt DWHT75021 Heavy Duty Electric Stapler, follow these steps:
1. Unplug the tool and ensure the on/off switch is in the "off" position.
2. Select the proper staple length for your application.
3. Hold the stapler upside down and squeeze the latch located on the bottom of the tool.
4. Pull the latch towards you to open the staple channel.
5. Drop the staples into the channel with the legs facing upward.
6. Push the latch back into place to lock the staples in position.
It is important to use only the staples identified by the stock numbers on the cover, as substitute staples may cause jamming. Additionally, make sure to unplug the tool and turn off the on/off switch before attempting to load staples for safety purposes. For more detailed instructions and illustrations, please refer to the DeWalt DWHT75021 Heavy Duty Electric Stapler Instruction Manual.
Add New Comment