User Manual Q&AAnswer
Dec 28, 2024 - 10:21 PM
To load staples into the Arrow T50DCD Cordless Electric Stapler, follow these steps:
1. Make sure the tool is powered off.
2. Turn the tool upside down and squeeze the pusher assembly to release it.
3. Pull the pusher assembly out until it stops to reveal the staple magazine.
4. Place the staples into the magazine with the points facing up and out of the tool.
5. Close the pusher assembly until it snaps into place.
Note: Do not attempt to completely remove the pusher assembly as it may damage the tool and void the warranty. Always ensure the tool is powered off before loading staples.
Add New Comment