User Manual Q&AAnswer
Dec 28, 2024 - 10:07 PM
Installing the STAR WARS 54468 LED Puck Lights is a simple process. Here are the step-by-step instructions:
1. Prepare the mounting surface: Clean the surface where you want to install the puck lights. Ensure it is dry and free from any dust or debris.
2. Attach the adhesive pads: Peel off the adhesive backing from the included adhesive pads. Stick one pad to the back of each puck light.
3. Choose the installation method: Decide on the installation method that suits your needs. The puck lights can be mounted using adhesive pads, magnets, hook-and-loop tape, or keyhole slots.
4. Adhesive pad installation: If you choose to use adhesive pads, firmly press the puck lights onto the desired surface. Make sure to hold them in place for a few seconds to ensure a secure bond.
5. Magnet installation: If you prefer to use magnets, attach the magnets to the back of the puck lights. Then, place the lights on any metal surface, such as a refrigerator or metal shelf.
6. Hook-and-loop tape installation: For hook-and-loop tape installation, attach one side of the tape to the back of the puck lights and the other side to the desired surface. Press firmly to ensure a strong bond.
7. Keyhole slot installation: If you want to hang the puck lights on a wall, use the keyhole slots. Insert screws or nails into the wall, leaving a portion exposed. Align the keyhole slots on the back of the puck lights with the screws or nails, and slide the lights downward to secure them.
8. Adjust the placement: Once the puck lights are installed, adjust their positions as needed to achieve the desired lighting effect.
Note: The package includes a set of adhesive pads for mounting, but additional hardware may be required for other installation methods.
Remember to refer to the user manual for any specific instructions or safety precautions provided by the manufacturer.
Add New Comment