User Manual Q&AAnswer
Dec 28, 2024 - 10:05 PM
Installation of the AVF EAK70W-A Speaker Mounts, Side Clamping is relatively straightforward. Here are the step-by-step instructions:
1. Before starting the installation, make sure to read through all the instructions provided in the manual.
2. Identify the location where you want to mount the speakers. Ensure that the wall or surface is sturdy enough to support the weight of the speakers.
3. Using a stud finder or other appropriate tools, locate the studs or anchors in the wall where you plan to mount the speaker mounts. It is recommended to mount the speaker mounts onto studs for maximum stability.
4. Once you have identified the mounting location, hold the speaker mount against the wall and mark the positions for the mounting screws.
5. If necessary, drill pilot holes at the marked positions to make it easier to insert the screws.
6. Attach the speaker mount to the wall using the provided screws. Make sure to tighten the screws securely, but avoid over-tightening.
7. Repeat the above steps for the second speaker mount if you are installing a pair.
8. Once the speaker mounts are securely attached to the wall, adjust the width of the mounts to fit your speakers. The AVF EAK70W-A Speaker Mounts offer a width adjustment range of 5.7 inches to 12.6 inches.
9. Place your speakers onto the mounts and adjust the tilt and rotation angles as desired. The AVF EAK70W-A Speaker Mounts allow for upward tilt of 5 degrees, downward tilt of 15 degrees, and rotation of 130 degrees.
10. After positioning the speakers, ensure that they are securely clamped in place using the side clamping mechanism provided by the mounts.
11. Finally, double-check the stability of the mounted speakers and make any necessary adjustments to ensure they are level and secure.
For more detailed instructions and illustrations, please refer to the user manual provided with the AVF EAK70W-A Speaker Mounts, Side Clamping.
Add New Comment