User Manual Q&AAnswer
Dec 28, 2024 - 09:55 PM
To connect the ELAC Debut 2.0 DS10.2 Powered Subwoofer to your audio system, follow these steps:
1. If you are connecting the subwoofer to an AV Receiver or Pre-Amp with a dedicated subwoofer or LFE output, connect an RCA cable (not supplied) from the LFE/Subwoofer output on the AV Receiver/Pre-Amp to the Left RCA input on the subwoofer.
2. If you are connecting the subwoofer to a stereo pre-amp or AV Receiver without a dedicated LFE/Subwoofer output, connect a set of stereo RCA connectors to the left and right RCA inputs on the subwoofer. If your pre-amp only has one set of pre-outs, use a splitter for each output on the pre-amp and connect two sets of stereo RCA cables to both the amplifier and the subwoofer.
Please refer to the "Controls and Indicators" section of the manual for more information on the various controls and switches on the subwoofer that can be adjusted to optimize its performance.
Note: Make sure to turn off all equipment before connecting the RCA cables and ensure that the power cable is securely connected to avoid electrical shock.
Add New Comment