User Manual Q&AAnswer
Dec 28, 2024 - 09:51 PM
To install the Streamlight TLR-6 on your handgun, please follow these steps:
1. Ensure that your firearm is unloaded and the breech is open. Safety measures must be employed at all times while handling the firearm.
2. Open the battery door on the TLR-6 and remove any batteries. Do not close the battery door.
3. Use the included hex wrench to loosen and remove the three mounting/assembly screws.
4. Separate the two halves of the TLR-6 housing and retain the laser/LED module.
5. Place the side of the housing without the battery door attached on a flat work surface.
6. Place the laser/LED module into the molded surface and direct the LED and laser compartments to their respective openings.
7. Align the trigger guard of your unloaded firearm with the matching groove in the TLR-6 housing and place both onto the flat work surface.
8. Place the mating side of the TLR-6 over the trigger guard and onto the other half of the TLR-6, maintaining alignment while joining the two halves together.
9. Securely fasten the two TLR-6 halves together with the three mounting screws. Do not over tighten the screws.
10. Reinstall the batteries, ensuring proper polarity/orientation, and secure the battery door.
Please note that it is important to thoroughly practice with the TLR-6 and firearm before using it in a tactical situation. For further details and illustrations, please refer to the Streamlight TLR-6 Tactical Weapon Light Operating Instructions manual.
Add New Comment