User Manual Q&AAnswer
Dec 28, 2024 - 09:33 PM
To connect the Pyle PDA20BT amplifier to your Bluetooth device, follow these steps:
1. Turn on the amplifier by rotating the volume/power xxxx clockwise.
2. Make sure the Bluetooth device you want to connect is within the wireless range of the amplifier (30ft).
3. On your Bluetooth device, enable Bluetooth and search for available devices.
4. Look for the device named "PYLEUSA" in the list of available devices and select it.
5. Once connected, the LED bulb on the amplifier will turn green, indicating that the Bluetooth connection is established.
6. You can now stream audio wirelessly from your Bluetooth device to the amplifier.
Please note that if you want to connect the amplifier to an audio source via RCA input, you will need to interrupt the Bluetooth connection from your Bluetooth device. The RCA input will take priority over the Bluetooth connection.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the amplifier.
Add New Comment