User Manual Q&AAnswer
Dec 28, 2024 - 09:31 PM
To pair your Plantronics BackBeat GO 810 wireless headphones with your device, follow these steps:
1. Slide the power switch on your headphones to turn them on. You will hear "pairing" and the LEDs will flash red and white.
2. Activate Bluetooth on your phone or device and set it to search for new devices.
- For iPhone: Go to Settings > Bluetooth > On.
- For Android: Go to Settings > Bluetooth: On > Scan for devices.
(Note: Menu options may vary by device.)
3. Select "PLT BBGO800 Series" from the list of available devices.
4. If prompted, enter the passcode "0000" or accept the connection. Once successfully paired, you will hear "pairing successful" and the LEDs will stop flashing.
If you want to pair a second device, follow these additional steps:
1. Slide and hold the power button towards the Bluetooth icon on your headphones until the LEDs flash red and white.
2. In your device's Bluetooth settings, select "PLT BBGO800 Series" again.
- If you have a Bluetooth-enabled Mac, you can pair your headset to it by placing your headset in pair mode (slide and hold the power button towards the Bluetooth icon). The LEDs will flash red and blue.
- On your Mac, choose Apple menu > System Preferences > Bluetooth.
- Click "Set Up New Device" or "+", select "PLT BBGO800 series stereo," and follow the onscreen instructions.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with your Plantronics BackBeat GO 810 wireless headphones. You can access the user guide by clicking on the following link: [Plantronics BackBeat GO 810 Wireless Headphones User Guide](https://manuals.plus/wp-content/uploa...)
Add New Comment