User Manual Q&AAnswer
Dec 28, 2024 - 09:04 PM
To pair your JVC HAET45TB Truly Wireless Sport Headphones with your Bluetooth device, please follow the steps below:
1. Make sure the Bluetooth device is within one meter of the headphones.
2. Turn on the pairing mode on your Bluetooth device. Refer to your device's user manual for instructions on how to do this.
3. Press and hold the buttons on both the left (L) and right (R) headphones for about three seconds until the L indicator starts rapidly alternating between red and white, or until you hear the spoken message "Pairing mode."
4. Once the headphones are in pairing mode, they should appear in the list of available devices on your Bluetooth device.
5. Select the JVC HAET45TB from the list of available devices on your Bluetooth device to complete the pairing process.
If the headphones are still not connecting, try the following troubleshooting steps:
1. Restart your Bluetooth device and turn off and on the Bluetooth feature.
2. Ensure that the headphones and the Bluetooth device are within range of each other.
3. Reset the pairing by erasing the pairing data from the Bluetooth device list and then try pairing again.
4. If you are using an iPhone, make sure to update your device's software to the latest version.
5. If the issue persists, consult the user manual or contact JVC customer support for further assistance.
Please note that these steps are based on the information provided in the user manual for the JVC HAET45TB Truly Wireless Sport Headphones.
Add New Comment