User Manual Q&AAnswer
Dec 28, 2024 - 10:37 AM
To change the color on the Rquite R3NL01 Dirt Bikes 3D Night Light, follow these steps:
1. Make sure the night light is connected to a power source either via the USB cable or with the included batteries.
2. Locate the touch control on the base of the night light.
3. Tap the touch control once to turn on the light.
4. To change the color, tap the touch control again. Each tap will cycle through the available colors: white, green, red, blue, yellow, purple, and cyan.
5. Keep tapping the touch control until you reach the desired color.
6. If you want to adjust the brightness, press and hold the touch control. The light will gradually dim or brighten. Release the touch control when you reach the desired brightness level.
Note: The Rquite R3NL01 Dirt Bikes 3D Night Light features a touch control system, so there is no need for a remote control to change the color or adjust the brightness.
Add New Comment