User Manual Q&AAnswer
Dec 28, 2024 - 06:36 AM
To change the brightness settings on the IbayNawi Personalized Custom Neon Sign, you have two options: using a line dimmer or a remote dimmer.
1. Line Dimmer:
- Locate the line dimmer on the power cord of the neon sign.
- The line dimmer has three brightness levels: low, medium, and high.
- Slide the dimmer switch to the desired brightness level. Moving the switch to the left decreases the brightness, while moving it to the right increases the brightness.
2. Remote Dimmer:
- If your neon sign comes with a remote controller, use the remote to adjust the brightness levels.
- The remote dimmer offers three brightness levels as well as multiple dynamic modes.
- Press the brightness button on the remote to cycle through the different brightness levels.
- If you want to use dynamic modes, press the mode button on the remote to select the desired lighting effect.
Note: Make sure that the neon sign is powered on before attempting to adjust the brightness settings. If the brightness control is not working, ensure that the remote control is paired with the sign and that the batteries in the remote are functional. If the issue persists, the dimmer controller may need to be replaced.
For more information and visual instructions, please refer to the "Setup Guide" section of the IbayNawi Personalized Custom Neon Signs User Manual.
Add New Comment