User Manual Q&AAnswer
Dec 28, 2024 - 06:06 AM
To install the OSRAM 64150NL NIGHT BREAKER LASER bulbs, please follow these steps:
1. Before starting, ensure that your vehicle is turned off and the keys are removed for safety.
2. Access the headlight assembly by opening the hood of your vehicle.
3. Locate the old bulb that needs to be replaced. The OSRAM 64150NL NIGHT BREAKER LASER bulbs are designed to fit standard H7 sockets.
4. Carefully twist the old bulb counterclockwise and gently pull it out from the socket. Be cautious not to touch the glass part of the bulb with your bare hands, as oil from your fingers can create hot spots and lead to premature failure.
5. Take the new OSRAM 64150NL NIGHT BREAKER LASER bulb and insert it into the socket, ensuring it is securely fitted.
6. Twist the bulb clockwise to lock it in place. Make sure it is properly aligned and seated.
7. Repeat the above steps for the other headlight bulb if necessary.
8. After installation, turn on your vehicle's headlights to ensure that the OSRAM 64150NL NIGHT BREAKER LASER bulbs are functioning properly. Check for even brightness and correct beam alignment.
Please note that it is recommended to replace the bulbs in pairs to ensure consistent brightness and performance across both headlights. If you encounter any difficulties during the installation process, refer to the user manual provided with the product or consult a professional for assistance.
Add New Comment