User Manual Q&AAnswer
Dec 28, 2024 - 05:47 AM
To pair the Ai Buds 3 True Wireless Earbuds, please follow these steps:
1. Make sure both earbuds are in the off position.
2. Press and hold the power button on both earphones for around 15 seconds until the LED starts to flash blue.
3. Once the LED on the right earbud starts alternately flashing blue and red, and the LED on the left earbud starts flashing blue and red, it indicates that the earbuds are in pairing mode.
4. Open the Bluetooth settings on your device (phone, tablet, etc.).
5. Look for the Bluetooth name "Buds 3" and click on it to connect.
6. Once connected, you should hear a confirmation sound in the earbuds, indicating successful pairing.
If the earbuds still don't connect, try the following troubleshooting steps:
1. Ensure that Bluetooth is enabled on your device.
2. Turn off and on Bluetooth on your device.
3. Restart your device and the earbuds.
4. Reset the earbuds by placing them back in the charging case and holding the power button on both earphones for 10 seconds until the LED flashes red and then turns off.
5. Repeat the pairing process from step 1.
If you continue to experience difficulties, please refer to the owner's manual or contact the manufacturer's customer support for further assistance.
Add New Comment