User Manual Q&AAnswer
Dec 28, 2024 - 05:32 AM
To connect the DIGITNOW Bluetooth Record Player Turntable to external speakers, you have a few options depending on the setup of your speakers and receiver.
1. If your turntable has a built-in preamp:
- Plug the RCA input side of your cable into the turntable.
- Plug the 3.5mm side of your cable into your Bluetooth speaker or any other external speakers.
- This will allow you to connect your turntable directly to your house speakers.
2. If your receiver has a phono input:
- Connect the RCA cables from the turntable's audio outputs to the phono input on your receiver.
- Make sure the phono position on the pre-amp switch is selected.
- Connect the ground cable between the receiver and the turntable if your receiver has a grounding nut.
- This setup will allow you to use your receiver and speakers to play the audio from the turntable.
3. If your receiver does not have a phono input:
- Check if your turntable has a built-in preamp (refer to the owner's manual).
- If it does, connect the RCA cables from the turntable's audio outputs to any available input on your receiver (e.g., Line, Audio, CD, or Auxiliary).
- Make sure the phono position on the pre-amp switch is not selected.
- This setup will allow you to use your receiver and speakers to play the audio from the turntable.
Please refer to the user manual for more detailed instructions on connecting the turntable to external speakers and troubleshooting any issues you may encounter.
Add New Comment