User Manual Q&AAnswer
Dec 28, 2024 - 05:29 AM
To change the projection image on the Projectables 11738 LED Kids Night Light, follow these steps:
1. Ensure the night light is plugged into a standard wall outlet and turned on.
2. Locate the touch-sensitive switch on the night light. It is usually located on the base or side of the device.
3. Gently touch the switch to cycle through the available projection images. Each touch will switch to the next image in the sequence.
4. Continue touching the switch until you find the desired Disney princess image (Belle, Jasmine, Ariel, Moana, Tiana, or Mulan).
5. The projection will automatically adjust to display the selected image on the walls, ceiling, or floor.
Note: The touch-sensitive switch may require a firm touch to register the input. If the image does not change with a light touch, try applying slightly more pressure.
For more detailed instructions or troubleshooting assistance, please refer to the user manual provided with the Projectables 11738 LED Kids Night Light.
Add New Comment