User Manual Q&AAnswer
Dec 28, 2024 - 05:23 AM
To connect the ProCenter 1000 speaker to your amplifier or receiver, follow these steps:
1. Identify the red (+) and black (-) terminals on both the speaker and your amplifier or receiver.
2. Make sure the amplifier or receiver is turned off.
3. Connect the red (+) terminal on the ProCenter 1000 speaker to the red (+) terminal on the corresponding channel of your amplifier or receiver.
4. Connect the black (-) terminal on the ProCenter 1000 speaker to the black (-) terminal on the corresponding channel of your amplifier or receiver.
5. Repeat the above steps for any additional speakers you are connecting.
It is important to ensure that all speakers (left, right, and center) are connected in the proper phase. If one speaker is out of phase with the others, it may result in a lack of bass. If you experience this issue, double-check your connections and make sure all speakers are connected in the same way to the amplifier or receiver.
Please refer to the user manual for your specific amplifier or receiver for any additional instructions or settings related to connecting speakers.
Add New Comment