User Manual Q&AAnswer
Dec 28, 2024 - 05:18 AM
To connect the CS-9060 Center Channel Speaker to your receiver or amplifier, you have two options: Speaker-Level Only or Speaker-Level + LFE.
Option 1: Speaker-Level Only (recommended)
1. Connect speaker wire from your receiver/amplifier to the speaker level input on the back of the CS-9060.
2. Adjust your receiver/processor settings to "Speaker (Large)" and "Subwoofer (No)".
Option 2: Speaker-Level + LFE
1. Connect speaker wire from your receiver/amplifier to the speaker level input on the back of the CS-9060.
2. Connect an RCA cable from the Center Channel Pre-Out on the back of your receiver/processor to the LFE input on the back of the CS-9060.
3. Adjust your receiver/processor settings to "Speaker (Small)" and "Subwoofer (Yes)".
Note: It is recommended not to use your receiver's auto setup functions as they may not effectively set up and adjust speakers with integrated powered subwoofers.
Please refer to the complete user manual for additional information and detailed instructions on connecting and setting up the CS-9060 Center Channel Speaker.
Add New Comment