User Manual Q&AAnswer
Dec 28, 2024 - 05:13 AM
Switching between modes on the ENVENTOR Y011G Self Leveling Laser Level is easy with the slide switch located on the device. Here's a step-by-step guide on how to switch between the modes:
1. Locate the slide switch on the laser level. It is usually located on the side or top of the device.
2. To switch to self-leveling mode, slide the switch to the position labeled "Self-Leveling" or "Auto." In this mode, the laser level will automatically adjust to ensure accurate leveling.
3. To switch to manual mode, slide the switch to the position labeled "Manual" or "Lock." In this mode, the self-leveling feature is disabled, allowing you to set fixed angles manually. This is useful for specific applications where you need to lock the cross at a certain angle.
4. To switch to pulse mode, slide the switch to the position labeled "Pulse" or "Outdoor." In this mode, the laser level emits pulses instead of a continuous beam. Pulse mode is ideal for outdoor use or when working over longer distances. Please note that the laser beam may appear dimmer in pulse mode.
By following these steps, you can easily switch between the different modes on the ENVENTOR Y011G Self Leveling Laser Level to suit your specific application needs. For further details and illustrations, please refer to the user manual provided with the product.
Add New Comment