User Manual Q&AAnswer
Dec 28, 2024 - 04:44 AM
To pair the Master & Dynamic MW50+ Wireless Bluetooth Headphones with your device, please follow these steps:
1. Make sure the headphones are turned off. Slide the power switch to the middle position.
2. Slide the power switch to the "Bluetooth" position and hold it for about 2 seconds. The light on the headphones will start pulsing, indicating that the headphones are in pairing mode.
3. On your device, go to the Bluetooth settings and search for available devices.
4. Locate "MW50+" in the list of available devices and select it to initiate the pairing process.
5. Once the pairing is successful, the light on the headphones will become solid, indicating that the connection has been established.
If the headphones do not connect within 2 minutes, they will enter deep-sleep mode. In this case, simply cycle the power switch to awaken them and try the pairing process again.
For more detailed instructions and troubleshooting tips, please refer to the complete instruction manual provided with the headphones. You can access the manual using the following link: [Master & Dynamic MW50+ Wireless Bluetooth Headphones Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment