User Manual Q&AAnswer
Dec 28, 2024 - 04:18 AM
Installation of the OSRAM 64211NL NIGHT BREAKER LASER bulb is a straightforward process. Here is a step-by-step guide to help you install the bulb correctly:
1. Ensure the vehicle is turned off and the headlights are cool before starting the installation process.
2. Open the hood of your vehicle and locate the headlight assembly where the bulb needs to be replaced.
3. Identify the old bulb that needs to be replaced. The OSRAM 64211NL NIGHT BREAKER LASER bulb is designed to fit in standard H7 sockets.
4. To remove the old bulb, twist it counterclockwise and gently pull it out from the socket. Be careful not to apply excessive force to avoid damaging the bulb or the socket.
5. Take the OSRAM 64211NL NIGHT BREAKER LASER bulb and insert it into the socket. Align the tabs on the bulb base with the notches in the socket.
6. Once the bulb is properly inserted, twist it clockwise to secure it in place. Ensure that the bulb is seated correctly and securely in the socket.
7. Close the hood of your vehicle and make sure it is securely latched.
8. Turn on your vehicle's headlights to test the newly installed OSRAM 64211NL NIGHT BREAKER LASER bulb. The bulb should emit a bright white light, enhancing visibility on the road.
Note: If you are unsure about the installation process or encounter any difficulties, it is recommended to consult a professional or refer to the user manual for your specific vehicle model.
For more detailed instructions and illustrations, please refer to the user manual provided with the OSRAM 64211NL NIGHT BREAKER LASER bulb.
Add New Comment