User Manual Q&AAnswer
Dec 28, 2024 - 04:15 AM
Sure! Here are the step-by-step instructions for assembling the Vacmaster VHB305M 1101 Wet/Dry Vacuum:
1. Verify that the power cord is disconnected from the outlet.
2. Undo the latches on the power head.
3. Lift the power head off the collection tank.
4. Remove the contents from inside the collection tank and make sure you have all the included accessories.
5. For dry vacuum cleaning, install the supplied reusable cloth filter. Slide the filter down over the filter cage, making sure the whole cage is covered.
6. For wet vacuum cleaning, install the supplied foam filter. Slide the foam filter down over the filter cage, making sure the whole cage is covered.
7. Insert the casters into the respective sockets on the bottom of the base. Apply pressure until the casters snap into place.
8. Turn the collection tank upside down and fit the base assembly onto the tank. Secure the base to the tank with the supplied screws. Make sure the base is assembled correctly, but do not overtighten the screws.
9. Place the power head back on the collection tank, aligning the top section with the latches, and snap it into place.
10. Insert the larger end of the hose into the desired port on the power head.
11. Choose the desired accessory and insert it onto the end of the hose.
12. Your Vacmaster VHB305M 1101 Wet/Dry Vacuum is now assembled and ready to use.
Please refer to the operator's manual for more detailed instructions and safety information.
Add New Comment