User Manual Q&AAnswer
Dec 28, 2024 - 03:39 AM
To change the lighting modes on the KASZOO cld240 Ivy Leaf String Lights, you can follow these steps:
1. Make sure the lights are connected to a power source and turned on.
2. Locate the remote control that came with the string lights. If your package did not include a remote control, please note that the lights may not have the ability to change lighting modes.
3. On the remote control, you should see buttons labeled with different lighting modes. The available lighting modes may include Combination, In Wave, Sequential, Slo Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady On.
4. Press the corresponding button on the remote control to switch to the desired lighting mode. Each press of the button should cycle through the available modes.
5. Observe the string lights to see the new lighting mode in action. You can continue pressing the button to cycle through the different modes until you find the one you prefer.
Please note that if your package did not include a remote control, the lighting modes may be fixed and unable to be changed. In this case, the lights will likely have a default lighting mode that cannot be altered.
For more detailed instructions or troubleshooting tips, please refer to the user manual that came with your KASZOO cld240 Ivy Leaf String Lights.
Add New Comment