User Manual Q&AAnswer
Dec 28, 2024 - 03:37 AM
To change the lighting modes on the Fulighture Willow Vine Halloween Lights, follow these steps:
1. Ensure that the lights are turned on and functioning properly.
2. Locate the remote control that came with the lights.
3. Point the remote control towards the lights' battery box.
4. Press the "Mode" button on the remote control. Each press of the button will cycle through the available lighting modes.
5. Continue pressing the "Mode" button until you find the desired lighting mode. The available modes include Combination, In Wave, Sequential, Slo Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady On.
6. Once you have selected the desired lighting mode, the lights will automatically switch to that mode.
Note: If the remote control does not seem to be working, check the battery compartment of the remote control and replace the batteries if necessary. Also, ensure that the remote control is within range of the lights' battery box for proper operation.
For more detailed instructions and troubleshooting tips, refer to the Fulighture Willow Vine Halloween Lights User Manual provided with the product.
Add New Comment