User Manual Q&AAnswer
Dec 28, 2024 - 03:29 AM
To connect the Acoustic Audio by Goldwood CS-IC83 speakers to your home audio system, follow these steps:
1. Ensure that your home audio receiver or amplifier has raw speaker wire outputs and a power rating of no less than 10 and no more than 350 watts per channel.
2. Use CL3 rated in-wall certified raw speaker wire to connect your receiver to the speakers. Cut the wire to the desired length for each speaker.
3. Strip about 1/2 inch of insulation from the ends of the speaker wire.
4. Locate the spring-loaded raw wire connections on the back of each speaker. Press the red/black tabs to open the connection terminals.
5. Insert the bare wire ends into the corresponding red (+) and black (-) terminals. Make sure the wire is securely inserted and that the red wire is connected to the red terminal and the black wire is connected to the black terminal.
6. Release the tabs to secure the wire in place. Ensure that there is no exposed wire touching other terminals or metal parts.
7. Repeat the process for each speaker, connecting them to the appropriate channels on your receiver or amplifier.
8. Once all the speakers are connected, turn on your home audio system and adjust the volume and settings as desired.
For more detailed instructions, please refer to the instruction manual provided with the Acoustic Audio by Goldwood CS-IC83 speakers.
Add New Comment