How do I install the SVS SoundPath Subwoofer Isolation System? (SVS SoundPath Subwoofer User Instruction)

Answer

manuals.plus

Dec 28, 2024 - 02:07 AM

To install the SVS SoundPath Subwoofer Isolation System, follow these steps:

1. For cabinet/box style subwoofers:
a. Place padding, such as a soft blanket, on the flooring to protect the subwoofer's finish.
b. Carefully place the subwoofer cabinet on its side or top, resting on the blanket. Avoid damaging the amplifier.
c. Unthread and remove the subwoofer's original equipment (OE) feet.
d. Gather the 16 mm long machine screws from the Isolation System kit. Choose the correct thread size (SVS cabinet subwoofers use the ¼-20 thread size).
e. Install the Isolation feet by inserting the machine xxxx through the bottom opening of the rubber foot, through the opening in the steel outer shell, and into the threaded insert of the subwoofer cabinet. Hand-tighten snugly, avoiding over-tightening.
f. Carefully lift the subwoofer cabinet and place it directly down onto the installed Isolation feet. Avoid damaging the amplifier.

2. For SVS cylinder subwoofers:
a. Lay the cylinder subwoofer sideways on a stable surface, avoiding damage to the amplifier.
b. Peel off the original equipment (OE) rubber disc feet.
c. Remove one OE machine xxxx at a time to prevent the base plate from dislodging. Avoid excessive downward pressure on the xxxx .
d. Install the Isolation foot by inserting the OE machine xxxx through the bottom opening of the rubber foot, through the opening in the steel outer shell, through the base plate, and into the t-nut on the backside of the woofer end-cap. Tighten securely using hand pressure.
e. Carefully stand the cylinder subwoofer back onto the installed Isolation feet. Avoid damaging the amplifier.

Important: When placing or moving the subwoofer, avoid excessive lateral load on the Isolation feet or dragging the subwoofer across the flooring with the Isolation feet installed. Always lift the subwoofer to move it.

For more detailed instructions and illustrations, please refer to the SVS SoundPath Subwoofer Isolation System manual available at the following link: [link to manual]