User Manual Q&AAnswer
Dec 28, 2024 - 12:59 AM
To pair the SoundBot SB221 Bluetooth headset with your device, follow these steps:
1. Make sure the headset is charged. Charge the headset for at least 2 hours using the provided charging cable.
2. Turn on your device's Bluetooth function.
3. Press and hold the multifunction button on the headset for 7-9 seconds until the LED alternately flashes between red and blue.
4. On your device, go to the Bluetooth settings and search for new devices.
5. Select the SB221 from the list of available devices.
6. If prompted, enter the PIN code "0000" to complete the pairing process.
7. The SB221 will beep to confirm that it has successfully paired with your device.
If the pairing is unsuccessful, try the following:
- Make sure the headset is in pairing mode (LED flashing red and blue).
- Restart the pairing process on your device.
- If the issue persists, power off the headset by pressing and holding the multifunction button for 4 seconds, then repeat the pairing process from step 3.
- If you still have trouble, contact SoundBot support at support@volcus.com for further assistance.
Please refer to the user guide for more detailed instructions and troubleshooting tips.
Add New Comment