User Manual Q&AAnswer
Dec 27, 2024 - 11:32 PM
To connect the Klipsch R-52C center channel speaker to your AV receiver, you will need a speaker cable. Follow these steps:
1. Locate the speaker output terminals on your AV receiver. These are usually labeled as "Center" or "Center Channel."
2. Take one end of the speaker cable and connect it to the positive (+) terminal on the back of the R-52C speaker. The positive terminal is usually marked with a red color or a "+" sign.
3. Take the other end of the speaker cable and connect it to the corresponding positive (+) terminal on your AV receiver.
4. Repeat the above steps for the negative (-) terminals. Connect one end of the speaker cable to the negative terminal on the R-52C speaker and the other end to the corresponding negative terminal on your AV receiver.
5. Ensure that the connections are secure and tight.
6. Once the speaker is connected, make sure to configure your AV receiver to recognize the center channel speaker. Refer to your AV receiver's user manual for instructions on how to do this.
By following these steps, you should be able to successfully connect the Klipsch R-52C center channel speaker to your AV receiver and enjoy clear dialogue and music reproduction in your surround sound system.
Add New Comment