User Manual Q&AAnswer
Dec 27, 2024 - 11:10 PM
To connect the ANGELS HORN Vinyl Record Player to your stereo system, you can use the RCA jacks located on the back of the unit. These jacks serve as both the Phono output jacks and the Line output jacks, depending on the position of the Phono/Line Switch.
If you want to use the Line output, simply connect the RCA jacks to the appropriate input on your stereo system or active speakers. The Red plug should be connected to the Right channel, and the White plug should be connected to the Left channel.
If you want to use the Phono output, you will need to connect the RCA jacks to a phono preamp or the phono input of your stereo system. Again, make sure to connect the Red plug to the Right channel and the White plug to the Left channel.
Please note that if you set the Phono/Line switch to LINE position but connect the RCA jacks to the phono input of your stereo system, the sound may be distorted. Similarly, if you set the switch to PHONO position but connect the RCA jacks to the line input of your stereo system, the volume may be very low. Also, remember that the RCA jacks are not designed to be connected directly to passive/unpowered speakers.
For more detailed instructions and illustrations, please refer to the "Stereo System Connection" section in the user manual provided with the product.
Add New Comment