User Manual Q&AAnswer
Dec 27, 2024 - 11:07 PM
Sure! Here's a step-by-step guide on how to pair the PuroQuiets headphones with your device:
1. Charge the headphones: Plug the headphones into the charging cable and connect the cable to a USB wall charger. Wait until the blue light remains on, indicating a full charge. This may take up to 3 hours. (RED LED = Charging & BLUE LED = Fully Charged)
2. Turn on the headphones: Press the power button on the headphones to turn them on. For the first pairing, the headphone LED will fast flash blue and say "power on" & "pairing," indicating that it is ready to pair. For subsequent pairings, the headphones need to be turned on, and the Bluetooth button should be held for 3 seconds to enter pairing mode.
3. Enable Bluetooth on your device: Go to the Bluetooth settings on your device and make sure Bluetooth is turned on.
4. Pairing: Bring your device within 1 meter of the headphones. Follow the instructions on your device to search for discoverable devices. Select "PuroQuiets" from the list. You will hear "connected" when pairing is complete, and the LED on the headphones will change from fast flashing blue to slow flashing blue. The headphones are now ready for music or phone use. (BLUE fast LED flash = in pairing mode & BLUE slow LED flash = paired)
If you encounter any issues during the pairing process, please refer to the user guide provided with the headphones for more detailed instructions.
Add New Comment