User Manual Q&AAnswer
Dec 27, 2024 - 10:38 PM
To pair two Xeneo X21 speakers for True Wireless Stereo (TWS) mode, follow these steps:
1. Power on both X21 speakers and switch them to Bluetooth mode.
2. Disconnect any Bluetooth connections on both speakers.
3. Long press the PLAY button for 2 seconds on one of the speakers. This speaker will be the MASTER speaker.
4. After 6-8 seconds, the MASTER speaker will prompt "TWS Paired" and its operation indicator will flash in white.
5. The other speaker will be the SLAVE speaker and its operation indicator will show solid blue.
6. Now, connect your device (phone, tablet, etc.) with the MASTER speaker via Bluetooth. Note that only the MASTER speaker can be connected.
7. Enjoy the stunning left/right channel stereo sound.
Please note the following:
- You need to own two Xeneo X21 speakers to make the TWS pairing.
- The initial pairing time of two never-been-paired speakers could take up to 60 seconds.
- When you power off one of the speakers under TWS pairing mode, both speakers will be powered off.
- The mode switch button on the SLAVE speaker won't work in TWS pairing mode. If you press the mode switch button on the MASTER speaker, the TWS pairing will be automatically disconnected.
For more detailed instructions, refer to the "TWS (True Wireless Stereo) Pairing" section in the Xeneo X21 Portable Outdoor Wireless Bluetooth Speaker's instruction manual.
Add New Comment