User Manual Q&AAnswer
Dec 27, 2024 - 10:25 PM
To connect the Sony Extra Bass Bluetooth headphones to your device, follow these steps:
1. Make sure the headphones are charged. Connect the included micro-USB cable to the headphones and the other end to a computer or USB power source. The indicator light should turn on, indicating that the headphones are charging. Charging takes approximately 4 hours.
2. Once the headphones are charged, turn them on by holding down the power button for a few seconds until you see the light flashing and hear a voice guide saying "Power on".
3. On your device, enable Bluetooth and make sure it is in pairing mode.
4. On the headphones, press and hold the Bluetooth button until the indicator light starts flashing quickly. This puts the headphones in pairing mode.
5. On your device, search for available Bluetooth devices and select the Sony Extra Bass headphones from the list.
6. If prompted, enter the passcode "0000" to complete the pairing process.
7. Once connected, you should hear a voice guide saying "Bluetooth connected" and the indicator light on the headphones will stop flashing.
Your Sony Extra Bass Bluetooth headphones are now successfully connected to your device and ready to use.
Add New Comment