User Manual Q&AAnswer
Dec 27, 2024 - 08:50 PM
The TERK Amplified AM/FM Stereo Indoor Antenna can be connected to your radio tuner or receiver using different methods depending on the type of connections available. Here are the steps for each type of connection:
FM CONNECTIONS:
1. 75 OHM COAXIAL: If your tuner or receiver has a coaxial terminal, simply slide the Slip-On Coaxial connector on the FM lead of the antenna onto the coaxial terminal.
2. 75 OHM PUSH-BUTTON CONNECTION: If your tuner or receiver has push-button terminals for FM, you will need to use the supplied RED 75 Ohm matching transformer. First, slide the RED 75 Ohm matching transformer into the connector on the FM lead of the antenna. Next, slide the Red wire into the terminal marked "FM 75 Ohm". Lastly, connect the BLACK wire into the terminal marked "FM Ground" or "GND".
AM CONNECTIONS:
1. AM PUSH-BUTTON CONNECTION: The TERK antenna uses a Twin Lead Bare Wire for AM connections. If your tuner or receiver has a push-button connection, simply slip the bare wires into the push-button connections. For a xxxx Terminal connection, wrap the bare wires around the xxxx terminals and tighten them.
POWER CONNECTION:
Plug the small end of the included power supply into the jack located on the Slip-On Coaxial connector at the end of the FM Lead. Plug the large end of the power supply into any working electrical outlet.
Please refer to the TERK Amplified AM/FM Stereo Indoor Antenna user manual for visual illustrations and further details on making the connections.
Add New Comment