User Manual Q&AAnswer
Dec 27, 2024 - 08:24 PM
To pair your Pyle Marine ATV Powered Speakers with a Bluetooth device, follow these steps:
1. Make sure the speakers are turned on and in pairing mode. To enter pairing mode, hold down the MODE button for a few seconds until the LED light on the speaker starts flashing blue.
2. On your Bluetooth device (e.g., smartphone, tablet), go to the Bluetooth settings and make sure Bluetooth is turned on.
3. Search for available Bluetooth devices on your device. The Pyle speaker should appear as "Pyle" in the list of available devices.
4. Select the "Pyle" speaker from the list. If prompted, enter the password "0000" to pair the devices.
5. Once the pairing is successful, the LED light on the speaker will turn solid blue.
If you are still unable to pair your Bluetooth device with the Pyle Marine ATV Powered Speakers, try the following troubleshooting steps:
1. Ensure that the speakers are within the Bluetooth range of your device, typically around 30 feet.
2. Make sure that there are no other devices connected to the speakers. Disconnect any previously paired devices and try pairing again.
3. Check if the speakers have sufficient battery power. If the battery is low, charge the speakers using a micro-USB cable and a computer/laptop USB port.
If you continue to experience difficulties, refer to the user manual or contact Pyle customer support for further assistance.
Add New Comment