User Manual Q&AAnswer
Dec 27, 2024 - 09:46 AM
To switch between the different laser lines on the Huepar GF360G, you can follow these steps:
1. Turn on the laser tool by sliding the pendulum to the Unlocked Position.
2. Once the laser tool is turned on, you can short press the laser lines button repeatedly to switch between the different laser lines.
3. Each short press will cycle through the available laser line options.
4. The laser lines include vertical, horizontal, and cross lines, and you can select the desired line configuration by pressing the button until you reach the desired option.
Please note that the specific laser line configurations may vary depending on the model and settings of your Huepar GF360G laser level. Refer to the user manual for more detailed instructions and illustrations on how to switch between the laser lines.
Add New Comment