User Manual Q&AAnswer
Dec 27, 2024 - 09:26 AM
To pair the remote control with the CAT 82455 Remote Control Loader Truck, please follow these steps:
1. Make sure both the truck and the remote control have fresh batteries installed.
2. Turn on the power switch on both the truck and the remote control.
3. On the remote control, press and hold the pairing button (if available) until the LED indicator starts flashing.
4. On the truck, locate the pairing button (if available) and press it once.
5. The LED indicator on the remote control should stop flashing and remain solid, indicating that the pairing process is complete.
6. Test the controls on the remote control to see if the truck responds correctly.
If the remote control still doesn't work after following these steps, please refer to the troubleshooting section of the user manual or contact the manufacturer's customer support for further assistance.
Add New Comment