User Manual Q&AAnswer
Dec 27, 2024 - 08:41 AM
To pair the remote control with the SGILE SE220211 Remote Control Robot, please follow these steps:
1. Make sure both the robot and the remote control have fresh batteries installed.
2. Turn on the robot by locating the power switch, which is often found on the side or underneath the robot.
3. On the remote control, locate the pairing button. It is usually labeled as "Pair" or has an icon representing a connection.
4. Press and hold the pairing button on the remote control for a few seconds until the LED indicator starts flashing.
5. On the robot, locate the pairing button or area. It is usually located near the power switch or on the back of the robot.
6. Press and hold the pairing button on the robot for a few seconds until the LED indicator starts flashing.
7. Wait for the LED indicators on both the remote control and the robot to stop flashing and remain solid, indicating a successful pairing.
8. Test the remote control by pressing various buttons to control the robot's movements. The robot should respond accordingly.
If you encounter any issues during the pairing process, refer to the troubleshooting section of the user manual or contact SGILE customer support for further assistance.
Add New Comment