User Manual Q&AAnswer
Dec 27, 2024 - 08:25 AM
To turn on the Nikotek NK-01G Green Beam Horizontal Laser Level, follow these steps:
1. Locate the power button on the laser level. The power button is the slider button on the side of the product.
2. Slide the power button to the ON position. This will activate the laser level.
3. Once the laser level is turned on, it will start self-leveling within a 3.5° range. The device will automatically level itself to ensure accurate horizontal alignment.
4. If the surface is tilted beyond the 3.5° range, the laser will flash continuously, indicating that you need to adjust the setup for accurate leveling.
Note: The key at the top of the laser level is the laser lock button, not the power switch button. In lock mode, you can long press the top button for three seconds to enter laser lock mode.
For more detailed instructions and information on operating the Nikotek NK-01G Green Beam Horizontal Laser Level, please refer to the user manual included in the package.
Add New Comment