User Manual Q&AAnswer
Dec 27, 2024 - 08:21 AM
To switch between the different projecting modes on the PREXISO PLC30GLIT Rechargeable Dual Modules Line Laser, follow these steps:
1. Power on the laser by pressing the power button.
2. Once the laser is powered on, you can select the desired projecting mode by pressing the mode button. The mode button is usually located on the side or top of the laser level.
3. Each press of the mode button will cycle through the available modes. The available modes are typically horizontal, vertical, and cross-line projections.
4. Keep pressing the mode button until you reach the desired projecting mode.
5. The laser will now project the selected mode.
Please note that the specific location and functionality of the mode button may vary slightly depending on the model of the PREXISO PLC30GLIT laser level. Refer to the user manual for your specific model for more detailed instructions and illustrations.
Add New Comment